Iron and Manganese Removal System Hi Flow Water System 45lpm
Whole House Iron and Manganese Removal System
Will treat a Property using standard 15mm Pipework with flow rates Up to 45LPM
Economical Iron & Hydrogen Sulfide Filtration Media that out performs most traditional media.
No Oxidizing Chemicals Required
Effective from 5PH - 9 pH
The system has been designed to easily treat you iron an manganese problem.
The System will require a backwash on a daily basis in order that the treatment process remains effective.
Technical
Height 1575mm Approx
Diameter 305mm Approx
Connections 1 " BSP Inlet, Outlet
Drain Connection 1/2 hose
Max Flow Rate 45 lpm
Minimum Flow rate for backwash 38lpm
PH Range 5-9
ORP >negative 170 Millivolts
Removal Rates
Iron 15.00 PPM (15000 ug/l)
Hydrogen Sulfide 7 PPM (7000ug/l)
Manganese 3 PPM (3000 ug/l)
This media is suitable for use in most water conditions ORP Level must be above negative 170 millivolts, for conditions above 170 millivolts an additional oxidant may be required.
We strongly advise that if you are in any doubt regarding the suitability of this product, that you obtain a full water analysis and seek advice from one of our technical staff before going ahead with your purchase.
This system is designed only for the removal Iron, Manganese & Hydrogen Sulfide. Please seek advice from our technical team if you have other contaminants in your water supply that may be either harmful or effect the operation of this system.
Most units are supplied unassembled
*Bespoke Item* Restocking Charge Applicable.