Commercial Softener Clack Simplex 250 Flow Rate 10,000 litres per hour (2160)

Our commercial Simplex water softener range are the ideal solution for applications that require consistent water flow.

Simplex softeners use high quality vessels and superior softening resin. The unit is controlled with a multi-port valve on top of the vessel allowing automatic regeneration at a given time or after a metered quantity of water is used. A separate brine tank is included which sits next to the vessel.
The simplex 250 has a 50 litre resin tank capable of producing 50,000 litres of water.

Specification

1 x 250 litre resin tanks
Control valve

Logix 298-762 Meter control

Service flow
Peak 10,000 litres per hour
Max 10,000 litres per hour
Min 1000 Litres Per Hour

Capacity @ 300 ppm CaCO3
41,600 litres per tank

Salt usage per regeneration 36 kg

Inlet/outlet connection 1 1/2 inch Male BSP
Drain connection 3/4 inch hose elbow
operating pressure 20-120 psi
water temperature range 2 - 38 degrees Celsius

Dimensions Tank

Height 2130mm
Diameter 610mm

Brine Tank x1

Volume 500 litre
Height 1110 mm
Diameter 875mm

Valves supplied with 12 volt in-line wall mounted mains transformer (bare ends for wiring to fused spur).
Peak flow rate based on 40 bed volumes per hour
Higher flow rates may result in some residual hardness.
Salt dosage based on 150 gram per litre using C100E resin.
Capacity based on a conservative 50 gram CaCO3 removal per litre of resin.

Most units are supplied unassembled.