8 Litre Duplex Commercial Autotrol Softener Flow Rate 300 litres per hour (817)

Our commercial Duplex water softener range are the ideal solution for applications that require consistent water flow.

Whilst one tank performs a regeneration the second tank continues to supply softened water producing unrivalled daily supply.

Duplex softeners use high quality vessels and superior softening resin which reduces the amount of salt needed for regeneration. The units are controlled with a multi-port valve on top of the vessel allowing automatic regeneration at a given time or after a metered quantity of water is used.

A separate brine tank is included which sits next to the vessel.

The Duplex 8 has two 8 litre resin tanks each capable of producing 1,300 litres of water.

Specification

2 x 8 litre resin tanks

Control valve:
Logix 255-764 Meter control

Service flow
Peak 300 litres per hour (commercial applications requiring 0 CaCO3)

Max 300 litres per hour (Residual Hardness
Min 30 Litres per Hour

Capacity @ 300 ppm CaCO3
1,300 litres per tank

Salt usage per regeneration 3 kg

Inlet/outlet connection 3/4 inch Male BSP
Drain connection 1/2 inch hose elbow
operating pressure 20-120 psi
water temperature range 2 - 38 degrees Celsius

Dimensions Per Tank
Height 1090mm
Diameter 220mm

Brine Tank x1

Volume 35 litre
Height 440 mm
Diameter 320 mm

Valves supplied with 12 volt in-line wall mounted mains transformer (bare ends for wiring to fused spur).
Peak flow rate based on 40 bed volumes per hour
Higher flow rates may result in some residual hardness.
Salt dosage based on 150 gram per litre using C100E resin.
Capacity based on a conservative 50 gram CaCO3 removal per litre of resin.

Most units are supplied unassembled.