CALL A MEMBER OF OUR TEAM NOW - 0116 276 3334
When added to a RO system can produce 99.99% pure water with 0 TDS reading
Can be retro fitted to any RO system that uses 1/4" Tubing or pre fitted to our 5 Stage Reverse Osmosis system
The De-ionization filter takes the full size RO to a higher level of filtration. It is an excellent inline filter, especially for those who live in areas with exceptionally high levels of TOTAL DISSOLVED SOLIDS (TDS) in their tap water.
The post de-ionizer takes the small percentage of contaminants that the membrane could not remove and filters this to greater than 99.99% pure water.
It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity of close to 18 meg.ohm
Clear inline housing + DI (de-mineralize) resin filter: Produce 99.99% pure water by simply attaching this convenient deionization filter with RO unit.
Convenient post RO filtration DI unit (RO/DI unit) provides crucial supplemental filtration to remove most impurities for pure polished product water. Excellent in areas with hard water. Produce 99.99% pure water. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm. Technical Specifications: Diameter: 53mm Length: 254mm Max. flow rate: 200 lPH Max.
pressure: 4bar
Capacity: 500 gallons (2000 liters)
Approx 6 Months
In clear inline housing
If This is the First time you have purchased an additional stage filter from us you will also need to order the bracket and connections to fit this to your system.
Please use the drop down below and we will send Brackets connections and some additional tube.
For Merlin and direct flow systems add the 3/8 option to correspond with the tube size on your system
Please Note we use several suppliers for De Ionisation filters so the actual filter received may appear different to the generic picture.
Payment & Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.