500 Litre Simplex Commercial Autotrol Softener Flow Rate 16,000 litres per hour (3072)
Our commercial Simplex water softener range are the ideal solution for applications that require consistent water flow.
Simplex softeners use high quality vessels and superior softening resin. The unit is controlled with a multi-port valve on top of the vessel allowing automatic regeneration at a given time or after a metered quantity of water is used.
A separate brine tank is included which sits next to the vessel.
The Simplex 500 has a 500 litre resin tank capable of producing 83,300 litres of water.
Specification
1 x 500 litre resin tanks
Control valve
Logix 298-762 Meter control
Service flow
Peak 16,000 litres per hour
Max 16,000 litres per hour
Min 2000 Litres Per Hour
Capacity @ 300 ppm CaCO3
83,300 litres per tank
Salt usage per regeneration 60 kg
Inlet/outlet connection 1 1/2 inch Male BSP
Drain connection 3/4 inch hose elbow
operating pressure 20-120 psi
water temperature range 2 - 38 degrees Celsius
Dimensions Tank
Height 2290mm
Diameter 765mm
Brine Tank x1
Volume750ltr
Height 1110 mm
Diameter 1030mm
Valves supplied with 12 volt in-line wall mounted mains transformer (bare ends for wiring to fused spur).
Peak flow rate based on 40 bed volumes per hour
Higher flow rates may result in some residual hardness.
Salt dosage based on 150 gram per litre using C100E resin.
Capacity based on a conservative 50 gram CaCO3 removal per litre of resin.
Most units are supplied unassembled.