150 Litre Simplex Commercial Autotrol Softener Flow Rate 6000 litres per hour (1665)
Our commercial Simplex water softener range of products are the ideal solution for applications that require consistent water flow.
Simplex softeners use high quality vessels and superior softening resin. The unit is controlled with a multi-port valve on top of the vessel allowing automatic regeneration at a given time or after a metered quantity of water is used.
A separate brine tank is included which sits next to the vessel.
The simplex 150 has a 150 litre resin tank capable of producing 20,800 litres of water.
Specification
1 x 150 litre resin tanks
Control valve
Logix 268-762 Meter control
Service flow
Peak 6000 litres per hour
Max 6000 litres per hour
Min 600 Litres Per Hour
Capacity @ 300 ppm CaCO3
25,000 litres per tank
Salt usage per regeneration 24 kg
Inlet/outlet connection 1 inch Male BSP
Drain connection 3/4 inch hose elbow
operating pressure 20-120 psi
water temperature range 2 - 38 degrees Celsius
Dimensions Tank
Height 1875mm
Diameter 420mm
Brine Tank x1
Volume 300 litre
Height 1000 mm
Diameter 760mm
Valves supplied with 12 volt in-line wall mounted mains transformer (bare ends for wiring to fused spur).
Peak flow rate based on 40 bed volumes per hour
Higher flow rates may result in some residual hardness.
Salt dosage based on 150 gram per litre using C100E resin.
Capacity based on a conservative 50 gram CaCO3 removal per litre of resin.
Most units are supplied unassembled