New - Harvey Homewater Twin Tank Non Electric Water Softener


Fitting Kit: No Fitting Kit
Salt: No Salt
Water Filter: No Filter
Price:
Sale price€1.103,95

CALL A MEMBER OF OUR TEAM NOW - 0116 276 3334

Five year parts and labour warranty

Takes both Block and Tablet salt

CALL FOR YOUR DISCOUNT

This machine will only perform a regeneration based upon your water consumption, making it a very efficient machine. It supplies the entire property with softened, limescale free water. Uses either block or tablet salt
WHY THIS IS THE ONE TO BUY?
The Twin Tank softener differs in a number of ways from the traditional single tank units. The most obvious difference is the two tanks.

Single tank softeners cannot supply soft water whilst performing a regeneration program. All softeners need to perform regeneration as they all have a limited amount of water that they can soften. Regeneration effectively cleanses the resin to allow it to continue to produce soft water. A single tank machine will perform this action normally in the early hours of the morning. The disadvantage of this is you have the possibility of the softener doing this either before it has used up its full capacity or worse still running out if you suddenly use more water than the machine thinks you will (sometimes you dont know when extra guests turn up so you can't expect your softener to).
Because the Twin Tank has two tanks it can regenerate at any time of day or night as only one tank at a time is in service. When it has reached its capacity it performs a regeneration whilst the other tank continues to supply you with soft water.
WARRANTY
All EMWC Water Softeners have a 5-year warranty - at no extra cost! Because of its proven reliability, your EMWC water softener will have a five-year parts labour warranty (valid on purchases made after May 2014). This, alongside our proven track record for producing highly reliable equipment, has established us as one of the UK's most popular water softener companies.
MADE IN ENGLAND
The water softener is manufactured in the UK and is therefore designed specifically for the UK market and for our domestic water system.  It  means that we wet test the softener before it leaves the factory. You can rest assured that the water softener firstly works but more importantly, it doesn't leak.

COMBINATION BOILERS AND PRESSURISED SYSTEMS
With more and more heating systems using either a combination boiler or a pressurised system, the need for a water softener with the available flow rate is of paramount importance. All of our water softeners have an unrivalled flow rate of up to 50 lpm, making them ideal for even the most demanding system.

Technical
Connections; Inlet/Outlet 3/4" bsp male parralel 
Overflow; 1/2" Hose connector 
Drain; 3/8" O.D tubing 

Operating parameters

Max operating pressure; 8 bar (116 p.s.i ) 
Min dynamic operating pressure; 1 bar (14.5 p.s.i ) 
Max water temperature; 30 degree C 
Min water temperature; protect from freezing
BSI approved for use with aluminium heat exchange systems
Suitable for up to 8 people 

Volume & Weight 

Softener Resin volume 2x 4.3 litres 
Resin Vessel Dimensions 140mm Diameter x 400mm high 
Salt Storage capacity 15K tablet salt 

Dimensions 
Depth 440mm  - 17 inch
Height 485mm - 19 inch
Width 250mm
  - 10 inch  

Please allow 20mm for the elbow connections on the side of the softener

Operating Data 

Up to 508 Ltr capacity per tank at 250ppm hardness 
350 grams salt used per regeneration 
65% salt efficiency 
40 litres / min peak flow at 2 bar pressure drop 
30 litres / min rated service flow at 1 bar pressure drop 23 litres

Water used per Regeneration 
1.9 1/ min Maximum flow rate to drain 
11 Minutes Maximum regeneration Time 
< 1mg per litre softened water hardness 
(if you live in an area above 400ppm please select the 500 model)


INSTALLATION
Installing your softener could not be easier. Every softener comes complete with fitting instructions, a hardness test kit, waste & overflow hoses and an option of a full installation kit, allowing for installation by a plumber or DIY enthusiast.

Typical professional installation costs £100 - £200 subject to pipe size and fitting location.

Installation kits
Pressurised systems (Mega Flo) = 22mm Kit
Combination boilers = Combi Kit
Standard fittings (most homes = 15 mm Kit)

Please select correct Fitting Kit if required from the checkout

 £10.00 delivery charge for free salt provided


Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard PayPal Shop Pay Union Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed