Commercial Softener Clack Simplex 125 Flow Rate 5000 litres per hour (1465)

Our commercial Simplex water softener range are the ideal solution for applications that require consistent water flow.

Simplex softeners use high quality vessels and superior softening resin. The unit is controlled with a multi-port valve on top of the vessel allowing automatic regeneration at a given time or after a metered quantity of water is used. A separate brine tank is included which sits next to the vessel.

The Simplex 125 has a 125 litre resin tank capable of producing 20,800 litres of water.

Specification

1 x 125 litre resin tanks
Control valve

Logix 268-762 Meter control

Service flow
Peak 5000 litres per hour
Max 5000 litres per hour
Min 500 Litres Per Hour

Capacity @ 300 ppm CaCO3
20,800 litres per tank

Salt usage per regeneration 15 kg

Inlet/outlet connection 1 inch Male BSP
Drain connection 3/4 inch hose elbow
operating pressure 20-120 psi
water temperature range 2 - 38 degrees Celsius

Dimensions Tank

Height 1845mm
Diameter 410mm

Brine Tank x1

Volume 400 litre
Height 900 mm
Diameter 860mm

Valves supplied with 12 volt in-line wall mounted mains transformer (bare ends for wiring to fused spur).
Peak flow rate based on 40 bed volumes per hour
Higher flow rates may result in some residual hardness.
Salt dosage based on 150 gram per litre using C100E resin.
Capacity based on a conservative 50 gram CaCO3 removal per litre of resin.

Most units are supplied unassembled.