200 Litre Simplex Commercial Autotrol Softener Flow Rate 9000 litres per hour (1865)
Our commercial Simplex water softener range of products are the ideal solution for applications that require consistent water flow.
Simplex softeners use high quality vessels and superior softening resin.
The unit is controlled with a multi-port valve on top of the vessel allowing automatic regeneration at a given time or after a metered quantity of water is used.
A separate brine tank is included which sits next to the vessel.
The simplex 200 has a 200 litre resin tank capable of producing 33,000 litres of water.
Specification
1 x 200 litre resin tank
Control valve Logix 298-762 Meter control
Service flow Peak 5,700 litres per hour
Max 5,700 litres per hour
Min 570 Litres Per Hour
Capacity @ 300 ppm CaCO3 33,000 litres per tank
Salt usage per regeneration 27 kg
Inlet/outlet connection 1 1/2 inch Male BSP
Drain connection 3/4 inch hose elbow
Operating pressure 20-120 psi
water temperature range 2 - 38 degrees Celsius
Dimensions
Tank Height 1880mm
Diameter 535mm
Brine Tank x1
Volume 500 litre
Height 1110 mm
Diameter 875mm
Valves supplied with 12 volt in-line wall mounted mains transformer (bare ends for wiring to fused spur).
Peak flow rate based on 40 bed volumes per hour Higher flow rates may result in some residual hardness. Salt dosage based on 150 gram per litre using C100E resin. Capacity based on a conservative 50 gram CaCO3 removal per litre of resin.
Most units are supplied unassembled